The Next Step
Underfloor Heating
The Complete Service for Underfloor Heating
At Gas, each underfloor heating system is designed for your needs and we can cater for projects of all sizes from complete houses to conservatories and extensions, both new build and conversion.
Space & warmth, naturally.
Underfloor heating works by pumping controlled flows of warm water from a boiler through plastic tubing embedded in the floor. Because the emitting area is large, the warmth provided is sufficient even on a cold winter day without the need for an extra heat source.
No more radiators
Release floor and wall space, giving you back the freedom to use your home as you please.
Natural Radiated Heat
Underfloor heating is perfect for conservatories Underfloor heating warms the lower part of the room, giving a feeling of natural warmth with no stuffiness or draughts.
Performance designed
Each system is individually designed for the room or space it will heat for optimum performance.
Better efficiency
Features which enhance comfort also reduce the running costs, whilst the lower return temperatures of the water flow increase the efficiency of condensing boilers.
System Design & Installation
System components are carefully selected with an eye to efficient yet easy control. Each system is designed individually. Full installation instructions are provided, not only for the underfloor heating but also showing how it integrates with the domestic water supplies.
The calculations involved in designing the system are not simple. Rule of thumb is not good enough). The sophisticated design starts with specialised calculations on building heat loss which are used to determine the tube spacings, coil lengths, water flows, water temperatures, system pressure losses and pump and boiler sizing. This process ensures the system will give the necessary output from the floor, even on the coldest day.
Controllable
Discreet dial thermostats, wall mounted usually near the light switch, give simple setting of the temperature in each individual main room. You are in control.
Boiler Systems
The system can use any normal boiler type but the low temperature operation of underfloor heating makes some models better suited to it than others. Our technical department will be pleased to discuss your boiler choice with you. Combination boilers without storage cylinders or other boiler types with vented or unvented cylinders may be used.
Natural Warmth
Underfloor heating offers a new kind of freedom
at home - imagine, no more living space wasted
on radiators. Enjoy fully controllable, efficient
heating that has the versatility to be fitted almost
anywhere in the home.
Call us on 724811, if you’re interested in more
information and a no obligation quotation.
Any floor, Anywhere
Underfloor heating is suitable for almost any housing needs including conversions, refurbishments and extensions. It can be installed upstairs as well as down, with equal advantage. Because of the radiant heat produced, underfloor heating is very effective in areas with high ceilings. Underfloor heating is popular in conservatories where it is difficult to find places for radiators and they normally have screed floors, often tiled, so heat transfer is good.
Underfloor heating is perfect for conservatories.
Few Floor Covering Restrictions
A wide range of floor coverings may be used, including good quality carpet and underlay.Although all carpets act as an insulator, if simple guidelines are followed the efficiency of underfloor heating will not be affected. The low surface temperature of underfloor heating presents no problems with timber floor provided that the timber is well seasoned or kiln-dried and sensible procedures are followed toprevent the timber from taking up moisture from the building.
Downloads
Underfloor Heating Leaflet (PDF)
Call
Visit
